���M57�9G/��z�}3q�ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x10cc
load:0x403c8700,len:0xc2c
load:0x403cb700,len:0x30c0
entry 0x403c88b8
E (300) quad_psram: PSRAM chip is not connected, or wrong PSRAM line mode

Start...
ESP32 Chip model = ESP32-S3 Rev 2
Chip ID: 0
=== Crash Logger Started ===
Resetting invalid index: -1339601707
No crash detected - system started normally
System ready
Found SPIFFS partition: spiffs
Address: 0x00410000, Size: 12451840 bytes
SPIFFS mounted successfully! Total: 12451840 bytes, Used: 217088 bytes
=== Информация о NVS ===
Всего записей: 630
Использовано записей: 449
Свободных записей: 181
Всего пространства: 20160 байт
Свободно: 5792 байт
========================
Debug (dT:0):Init Culler
Debug (dT:1):Init WP
Debug (dT:1):Init Servo
Angle: 0 -> Pulse: 510us -> Duty: 417/16384
=== Detailed PWM Info ===
Servo: pin=10, channel=0, timer=0, bits=14, freq=50.0, duty=0/16384
Culler: pin=20, channel=2, timer=1, bits=10, freq=50.0, duty=0/1024
Power: NOT ATTACHED (channel=-1, pin=-1)
Pump: pin=11, channel=4, timer=2, bits=10, freq=100.0, duty=0/1024
Channels remaining: 5
=== Timer Allocation ===
Timer 0: freq=50Hz, channels=1/4
Timer 1: freq=50Hz, channels=1/4
Timer 2: freq=100Hz, channels=1/4
Timer 3: freq=-1Hz, channels=0/4
=== Channel Usage ===
Channel 0: pin=10, timer=0, bits=14
Channel 2: pin=20, timer=1, bits=10
Channel 4: pin=11, timer=2, bits=10
Debug (dT:58):Init WiFi... 
E (1943) phy_init: store_cal_data_to_nvs_handle: store calibration data failed(0x1105)
Attempt 1: Auto-connect from wifi.ini

=== Auto WiFi Connection ===
wifi.ini not found
No networks in wifi.ini
Attempt 2: Previous WiFi connection
....
Connected to RouteRich
IP 192.168.1.179
Debug (dT:2390):Init power stabilizer...
Debug (dT:1):Init STAB_AVR
Debug (dT:2):Sensors init... 
Debug (dT:203):BMP180 not found
Locating DS18B20...
Found 0 devices.
1 Sensor Address: 0000000000000000
2 Sensor Address: 0000000000000000
3 Sensor Address: 0000000000000000
4 Sensor Address: 0000000000000000
5 Sensor Address: 0000000000000000
6 Sensor Address: 0000000000000000
1 Sensor Resolution: 0
2 Sensor Resolution: 0
3 Sensor Resolution: 0
4 Sensor Resolution: 0
5 Sensor Resolution: 0
Debug (dT:183):Init heaterPID...
Debug (dT:1):init Msg System... 
No PSRAM - creating small buffer (6 messages)
Debug (dT:12):Buffer: 0/6 messages, RAM
Samovar started
Debug (dT:5):mDNS responder started
Debug (dT:1):Init Blynk...
Debug (dT:0):Init Telegram...
Debug (dT:0):Init OTA...
Angle: 0 -> Pulse: 510us -> Duty: 417/16384
Debug (dT:1):Power OFF 
Debug (dT:211):WebServer Init...
Debug (dT:5):init Mqtt...
Debug (dT:0):init NTP...
Samovar ready.
🔌 🔄 Причина перезагрузки: включение питания

=== ИСПОЛЬЗОВАНИЕ ПАМЯТИ ЗАДАЧАМИ ===
Задача: PowerStatus_Loo | Stack free: 2104
Задача: loopTask        | Stack free: 5600
Задача: Sensors_Loop    | Stack free: 4472
Задача: IDLE1           | Stack free:  356
Задача: IDLE0           | Stack free:  236
Задача: tiT             | Stack free: 2868
Задача: NET_Loop        | Stack free: 4992
Задача: sys_evt         | Stack free: 2692
Задача: arduino_events  | Stack free: 2928
Задача: async_tcp       | Stack free: 3328
Задача: ipc1            | Stack free:   88
Задача: mdns            | Stack free: 2404
Задача: ipc0            | Stack free:  256
Задача: esp_timer       | Stack free: 7732
Задача: wifi            | Stack free: 4028
Задача: Tmr Svc         | Stack free: 2428
Debug (dT:64346):Begin save
Debug (dT:25):Parsing end.
Debug (dT:206):!!!Сохранен DistTemp, Value=98.00
Debug (dT:42):!!!Сохранен UseDS, Value=0
Debug (dT:2):!!!Сохранен UseNTC, Value=1
Debug (dT:20):!!!Сохранен BMPFltr, Value=99
Debug (dT:54):!!!Сохранен r_ASt, Value=1
Debug (dT:3):Save end
Debug (dT:111528):Begin save
Debug (dT:24):Parsing end.
Debug (dT:206):!!!Сохранен DistTemp, Value=98.00
Debug (dT:37):!!!Сохранен UseDS, Value=0
Debug (dT:1):!!!Сохранен UseNTC, Value=1
Debug (dT:12):!!!Сохранен UsePump2, Value=0
Debug (dT:11):!!!Сохранен BMPFltr, Value=99
Debug (dT:4):!!!Сохранен PwrType, Value=8
Debug (dT:52):!!!Сохранен r_ASt, Value=1
Debug (dT:3):Save end
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4037dd51
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x10cc
load:0x403c8700,len:0xc2c
load:0x403cb700,len:0x30c0
entry 0x403c88b8
E (305) quad_psram: PSRAM chip is not connected, or wrong PSRAM line mode

Start...
ESP32 Chip model = ESP32-S3 Rev 2
Chip ID: 0
=== Crash Logger Started ===
No crash detected - system started normally
System ready
Found SPIFFS partition: spiffs
Address: 0x00410000, Size: 12451840 bytes
SPIFFS mounted successfully! Total: 12451840 bytes, Used: 217088 bytes
=== Информация о NVS ===
Всего записей: 630
Использовано записей: 449
Свободных записей: 181
Всего пространства: 20160 байт
Свободно: 5792 байт
========================
Debug (dT:0):Init Culler
Debug (dT:1):Init WP
Debug (dT:0):Init Servo
Angle: 0 -> Pulse: 510us -> Duty: 417/16384
=== Detailed PWM Info ===
Servo: pin=10, channel=0, timer=0, bits=14, freq=50.0, duty=417/16384
Culler: pin=20, channel=2, timer=1, bits=10, freq=50.0, duty=0/1024
Power: NOT ATTACHED (channel=-1, pin=-1)
Pump: pin=11, channel=4, timer=2, bits=10, freq=100.0, duty=0/1024
Channels remaining: 5
=== Timer Allocation ===
Timer 0: freq=50Hz, channels=1/4
Timer 1: freq=50Hz, channels=1/4
Timer 2: freq=100Hz, channels=1/4
Timer 3: freq=-1Hz, channels=0/4
=== Channel Usage ===
Channel 0: pin=10, timer=0, bits=14
Channel 2: pin=20, timer=1, bits=10
Channel 4: pin=11, timer=2, bits=10
Debug (dT:58):Init WiFi... 
E (1960) phy_init: store_cal_data_to_nvs_handle: store calibration data failed(0x1105)
Attempt 1: Auto-connect from wifi.ini

=== Auto WiFi Connection ===
wifi.ini not found
No networks in wifi.ini
Attempt 2: Previous WiFi connection
....
Connected to RouteRich
IP 192.168.1.179
Debug (dT:2396):Init power stabilizer...
Debug (dT:0):Init STAB_AVR
Debug (dT:2):Sensors init... 
Debug (dT:202):BMP180 not found
Locating DS18B20...
Found 0 devices.
1 Sensor Address: 0000000000000000
2 Sensor Address: 0000000000000000
3 Sensor Address: 0000000000000000
4 Sensor Address: 0000000000000000
5 Sensor Address: 0000000000000000
6 Sensor Address: 0000000000000000
1 Sensor Resolution: 0
2 Sensor Resolution: 0
3 Sensor Resolution: 0
4 Sensor Resolution: 0
5 Sensor Resolution: 0
Debug (dT:183):Init heaterPID...
Debug (dT:1):init Msg System... 
No PSRAM - creating small buffer (6 messages)
Debug (dT:12):Buffer: 0/6 messages, RAM
Samovar started
Debug (dT:5):mDNS responder started
Debug (dT:0):Init Blynk...
Debug (dT:0):Init Telegram...
Debug (dT:1):Init OTA...
Angle: 0 -> Pulse: 510us -> Duty: 417/16384
Debug (dT:1):Power OFF 
Debug (dT:211):WebServer Init...
Debug (dT:5):init Mqtt...
Debug (dT:0):init NTP...
Samovar ready.
💻 🔄 Причина перезагрузки: программный сброс

=== ИСПОЛЬЗОВАНИЕ ПАМЯТИ ЗАДАЧАМИ ===
Задача: NET_Loop        | Stack free: 5472
Задача: loopTask        | Stack free: 5600
Задача: Sensors_Loop    | Stack free: 3872
Задача: PowerStatus_Loo | Stack free: 2148
Задача: IDLE1           | Stack free:  356
Задача: IDLE0           | Stack free:  236
Задача: tiT             | Stack free: 2868
Задача: sys_evt         | Stack free: 2692
Задача: arduino_events  | Stack free: 2928
Задача: async_tcp       | Stack free: 3324
Задача: ipc1            | Stack free:   88
Задача: mdns            | Stack free: 2400
Задача: esp_timer       | Stack free: 7732
Задача: ipc0            | Stack free:  256
Задача: wifi            | Stack free: 4028
Задача: Tmr Svc         | Stack free: 2428
Debug (dT:125045):Begin save
Debug (dT:24):Parsing end.
Debug (dT:261):!!!Сохранен PwrType, Value=8
Debug (dT:54):Save end
